HomePiNAS

HomePiNAS is a platform with 6 SATA ports, 2 M.2 NVMe slots, and dual Ethernet.

Hay existencias

Raspberry Pi (Optional)

Accessories

Features

  • 6 SATA III ports for 2.5″ and 3.5″ HDD/SSD drives
  • 2 M.2 NVMe slots for storage (cache or system)
  • Dual Ethernet: 1G + 2.5G for maximum network performance
  • USB-C for direct flashing with rpi-boot
  • Complete 40-pin GPIO header
  • Integrated power supply for CM5+ drives with reliable power-up
  • Compatible with OpenMediaVault, Nextcloud, Jellyfin, Plex, Home Assistant and the entire Raspberry Pi ecosystem
  • Scalable from 1 disk up to RAID configurations with 6 drives via software
  • Low power consumption less than 15W (without discs)

Technical specifications

  • Storage: 6× SATA III + 2× M.2 NVMe
  • Red: 1× Gigabit Ethernet + 1× 2.5 Gigabit Ethernet
  • USB: 1× USB-C (flash and power)
  • Expansion: 40-pin GPIO header
  • Power supply: DC input (Maximum 20.5V, Minimum 17V) 5.5mm x 2.5mm connector
  • Compatibility: Raspberry Pi Compute Module 5 ECC/LITE
  • Typical power consumption: <15W (without discs)
  • Supported drives: 2.5″ and 3.5″ SATA HDD/SSD
  • MicroSD card slot

What’s included?

  • HomePiNAS base plate
  • Wiki with product guide

What else do I need?

  • Raspberry Pi Compute Module 5
  • HDD/SSD drives according to desired configuration
  • Power supply
  • Box/chassis (optional)